Store

NetGain Motors (freight billed separately)

Part# NetGainMotors

All Motors and Accessories by NetGain Motors, Inc.
Select Model:
Scroll product page for details
Description

Part Number, Model - Description: (order by selecting part# from drop down above)

MOTOR TERMS USED BELOW: DE=Drive End; CE=Commutator End; EMIS=Engine Motor Interface System; 

00-08217, WarP 7:

  • series wound, DC motor
  • 7.25" diameter
  • double ended shaft, CE & DE are 1.125" with 1/4" keyway.
  • advanced timing - can be adjusted to CWDE or CCWDE(from the normal Neutral)
  • for use in single motor, dual motor and EMIS and/or direct drive applications.
  • high efficiency fan
  • massive commutator and brushes
  • brush wear indicators
  • temperature snap switch, signals extreme overheat condition.

00-08207, TransWarP 7:

  • This motor was designed to replace a transmission and couple directly to a drive shaft.
  • double DE bearings.
  • "shorty" tail shaft housing (from a Chevrolet Turbo 400 transmission) fitted to the drive end-bell (may be ordered with or without housing!)
  • DE shaft is 1.370", 32-tooth involute spline, identical to the tail shaft spline of a Turbo 400 transmission.
  • grease fittings (as you now have a slip-yoke assembly.
  • industry standard 1350 slip-yoke universal assembly, with grease fittings, so you can easily adapt it to any manufacturers drive shaft.
  • All other details and specifications are the same as the  00-08217 WarP 7 motor (listed above).

203-06-4001R, ImPulse 8 - Double ended shaft - no advance timing, .750" CE Shaft, 1.125" DE Shaft.

00-08218, WarP 8 - Double ended shaft - Advance timing, .875" CE Shaft, 1.125" DE Shaft.

00-08259, ImPulse 9 - Double ended shaft - advanced timing, 1.125" DE Shaft, .750" CE Shaft.

00-08269, ImPulse 9 - Single ended shaft - advanced timing, 1.125" DE Shaft.

00-08249, ImPulse 9 - Double ended shaft - advanced timing, 1.125" DE Shaft, .875" CE Shaft, WarP 9 style mounting holes.

00-08219, WarP 9 - Double ended shaft - advanced timing, 1.125" CE Shaft, 1.125" DE Shaft.

00-08309, TransWarP 9 - Double ended shaft - advanced timing, 1.125" CE Shaft, 1.370", 32-tooth spline, double DE bearings.

00-08311, WarP 11 - Double ended shaft - advanced timing, 1.125" CE Shaft, 1.125" DE Shaft.

00-08711, TransWarP 11 - Double ended shaft - advanced timing, 1.125" CE Shaft, 1.370", 32-tooth spline, double DE bearings.

00-08911, WarP 11HV - Interpoled, high-voltage, double ended shaft - no advance timing, .875" CE Shaft, 1.125" DE Shaft.

00-08611, TransWarP 11 HV - Double ended shaft - 1.125" CE Keyed Shaft, 1.370", 32-tooth splined DE Shaft, interpoles, lift-eye bolt hole, thermal switch, 8 mounting holes on CE, double wide bearings on DE (Special Order, 10-12 weeks).

00-08513, WarP 13 - *Double ended shaft - fan, advanced timing, 32 tooth spline, hardened shaft.

00-08413, WarP 13 - *Double ended shaft – fan, advanced timing, 10-spline, hardened shaft.

 

Accessories:

1350SYA, Slip Yoke - Slip-yoke assembly for use with all TransWarP ™ Motors.

10808219EE, Forced Air Cover Band - Forced air cover band for all 9.25” NetGain Motors, single 2.00” air inlet between terminal studs.

10808311EE-2, Forced Air Cover Band - Forced air cover band for all 11.45” NetGain Motors, single 2.00” air inlet.

T400STS, Shaft Housing - Turbo 400 style "shorty" tail shaft housing for use with all TransWarP ™ Motors - also requires Slip Yoke assembly.

Motor Crate, Crate for Motor - Ships in a wooden crate rather than standard foam-fill packaging. Handy for moving and storing motor.

* Base price, these items are special order - exact price quoted after all options are determined and accepted.